Roof Replacement Cost Per Square Foot in Texas (2026) — 1,000–3,000 Sq.Ft. Price Tables

The average roof replacement cost in Texas runs $4.50 to $9.00 per square foot for asphalt shingles and $7.00 to $12.00 per square foot for metal, installed. For a typical 1,500 sq.ft. roof, that works out to roughly $6,800 to $13,500 depending on material and complexity. Below you’ll find complete price tables by home size and material, based on 2025–2026 averages across Texas.

Want a custom estimate instead? Use our Texas roof cost calculator, or jump straight to the cost tables by square footage.

🔨 Quick Answer: Roof Cost by Square Foot in Texas

Roofing contractors quote by the “square” (100 sq.ft.), but homeowners usually think in square feet. Here’s how installed pricing compares per square foot across the most common Texas roofing materials:

Material Cost per Sq.Ft. 1,500 Sq.Ft. Total 2,000 Sq.Ft. Total
Asphalt (3-Tab)$3.75 – $4.75$5,600 – $7,100$7,500 – $9,500
Architectural Shingles$4.25 – $6.50$6,400 – $9,800$8,500 – $13,000
Metal (Corrugated/Exposed Fastener)$7.00 – $9.00$10,500 – $13,500$14,000 – $18,000
Standing Seam Metal$9.50 – $12.00$14,300 – $18,000$19,000 – $24,000
Clay or Concrete Tile$10.00 – $18.00$15,000 – $27,000$20,000 – $36,000
Slate$14.00 – $22.00$21,000 – $33,000$28,000 – $44,000

Installed pricing including tear-off of one existing layer, materials, and labor. Prices from our asphalt, metal, tile, and slate cost guides.

🏠 Roof Replacement Cost by Home Size (Sq.Ft.)

Your roof’s footprint is usually larger than your home’s living area — typically 15–25% more because of overhangs, pitch, and garage space. The table below quotes roofing square footage, not floor area.

800 – 1,000 Sq.Ft. Roof (small home, garage, or ADU)

Material800 Sq.Ft.1,000 Sq.Ft.
Asphalt Shingles$3,000 – $5,200$3,800 – $6,500
Metal Roofing$5,600 – $9,600$7,000 – $12,000
Tile$8,000 – $14,400$10,000 – $18,000

1,200 – 1,500 Sq.Ft. Roof (typical 3/2 ranch)

Material1,200 Sq.Ft.1,500 Sq.Ft.
Asphalt Shingles$4,500 – $7,800$5,600 – $9,800
Metal Roofing$8,400 – $14,400$10,500 – $18,000
Tile$12,000 – $21,600$15,000 – $27,000

So, how much does a 1,500 sq.ft. roof cost in Texas? Most homeowners pay $6,800 to $9,800 for architectural shingles or $10,500 to $18,000 for metal. If you meant a 1,500 sq.ft. house, its roof is roughly 1,700–1,900 sq.ft., so budget $7,500–$12,000 for asphalt.

1,800 – 2,000 Sq.Ft. Roof (mid-size suburban home)

Material1,800 Sq.Ft.2,000 Sq.Ft.
Asphalt Shingles$6,800 – $11,700$7,500 – $13,000
Metal Roofing$12,600 – $21,600$14,000 – $24,000
Tile$18,000 – $32,400$20,000 – $36,000

2,500 – 3,000+ Sq.Ft. Roof (large two-story)

Material2,500 Sq.Ft.3,000 Sq.Ft.
Asphalt Shingles$9,400 – $16,300$11,300 – $19,500
Metal Roofing$17,500 – $30,000$21,000 – $36,000
Tile$25,000 – $45,000$30,000 – $54,000

📐 Home Square Footage vs. Roofing Square Footage

Contractors measure roofs in “squares” — one square equals 100 sq.ft. of roof surface. Because of pitch and overhangs, a 2,000 sq.ft. single-story home typically has a 2,300–2,500 sq.ft. roof. Two-story homes have less roof per square foot of living space. Rough conversion:

  • 1-story home: roof ≈ floor area × 1.15–1.30
  • 2-story home: roof ≈ floor area × 0.8–0.9

When a roofer quotes “$450 per square,” that’s $4.50 per square foot.

💰 What Changes Your Per-Square-Foot Price

  • Tear-off layers: each additional layer of old shingles adds roughly $0.50–$1.00 per sq.ft.
  • Roof pitch and complexity: steep (8/12+) or cut-up roofs with valleys and dormers add 10–25% to labor.
  • Decking repair: replacing rotten plywood runs $75–$150 per sheet.
  • Location: see our city guides for Dallas, Houston, Austin, San Antonio, and Fort Worth.
  • Material choice: metal subtype matters — see our full metal roof cost guide for corrugated vs. standing seam vs. aluminum pricing.

🧾 Does Insurance Cover Roof Replacement in Texas?

Hail and wind damage are the #1 reason Texas roofs get replaced, and most policies cover it minus your deductible. Texas law caps roof deductibles at 1–2% of dwelling coverage. See our guide to roof insurance rules for Texas homeowners for the claim process.

✅ Bottom Line

Budget $4.50–$6.50 per square foot for asphalt, $7–$12 for metal, and $10+ for tile or slate, installed. For an estimate tuned to your size, material, and city, try our Texas roof replacement cost calculator — or get free quotes from licensed Texas roofers →